Robert J. Fischgrund Center for the Performing Arts- Technical Information

Load In/Out and Parking:

• Loading dock access door: Height: 14’Dock Height: 48” above grade.
• Number of trucks to load/unload at one time: One.
• Parking available in loading dock area: One truck and one bus (Additional parking available near by).
• One small access door available from ground level: Height 7’ Width: 42”.
• Staging area both stage right & stage left: 42’ x 20’.

Stage Equipment and Information:

• Max stage size: 62’ x 30’.
• Max stage weight capacity: 125-lbs per square foot.
• Overhead clearance of 20’ 8” from stage floor to overhead steel grid.
• 5 overhead beams for rigging @ 12’ on center running from front to back over stage area. Rated a 6000-lbs max per beam.  Detailed information available upon request. (CAD drawing of steel grid in pdf file format)
• One Genie AWP Super Series Aerial Work Platform: Max Platform Height: 24’ 9”.
• Small Orchestra Pit located directly in front of main stage area. 62’ long x 12’ wide @ 9’ below main stage elevation.
• center mixing location @ 125’ from center stage:  12’ wide x 8’ deep.
• Two Sound and Lighting towers are available approximately 105’ from center stage at a 30 degree angle from stage right and left.
• Lighting Connection – Up Stage Right: One 165-circuit lighting patch panel for stage and tower locations.

Power Information:

• Lighting Power Connection – center Stage Right: 120/208 vac 3 phase 5 wire 400 Amp
• Sound Power Connection – Up Stage Right: 120/208 vac 3 phase 5 wire 100 Amp
• Note: Services are on separate transformers.
• Back of stage: 6 evenly spaced 4 gang 120 Volt 20 Amp Receptacles – three 20 Amp circuits total.
• Stage Right in floor: 3 evenly spaced 4 gang 120 Volt 20 Amp Receptacles – two 20 Amp circuits total.
• Stage Left in floor: 3 evenly spaced 4 gang 120 Volt 20 Amp Receptacles – two 20 Amp circuits total.
• Bus Connection: One 120/208 vac 1 phase 4 wire 60 Amp connection located near the loading dock.

Technical Information